For the DIY’er looking to bond loose stones between flagstones, we offer a complete kit with all components needed. If your project is larger, you can use your own stones and please contact us about purchasing the liquid in bulk. This kit is designed to cover approximately 375 – 400 linear feet of joints (more info on coverage below).
If you’re looking for our larger containers of Gravel-Lok® in either the 1 gallon, 5 gallon, or 50 gallon drums, please reach out to one of our dealers or contact us directly if there isn’t a dealer near you.
- 50 lbs of clean, 1/8″ washed stone ready to use
- Two, 12 oz. bottles (24 oz. total) Gravel-Lok® Clear (this is enough liquid to bond the stones in the kit only)
- Plastic Scoop
- Complete kit comes in a blue plastic bucket, perfect for mixing.
Coverage rate per kit: Approx. 375 – 400 linear feet of joints which are 2″ W x 1″ deep.
Alternately, another way to approximate coverage is to assume the kit will do approx. 40 – 50 square feet of joints in a patio with flagstones that are approx. 20 to 24″ length x 20″ – 24″ in width and joints 2″ wide x 1″ deep.
Note: if you use kit for a different purpose other than joints, then the coverage rate is approximately 4.6 square feet at 1″ thick or 2.3 square feet at 2″ deep.