60 Second Seminar Session 3: LSG for DIY Parking Pad


Each brief educational session is designed to provide concise, interesting, informative insights on a variety of topics in just 60 seconds. You will be surprised at how much you can learn with only 60 seconds of your time!


Session 3:

LSG Series® DIY for Parking Pad


An extra parking spot or expanded parking can be very helpful. Building one seems easy. Some people simply bring in a load of gravel, spread it out and they instantly have a parking pad. However, over time that gravel will migrate into the earth, become rutted, travel outside of the perimeter and eventually need to be replaced with a fresh load of gravel. Fortunately, there is a great solution…

The parking pad can be both EASY TO INSTALL and PERMANENT by using Cell-Tek’s Load Support Grid (LSG). The system prevents the lateral displacement of infill materials which eliminates rutting and washboarding usually associated with gravel pavements. Even if you have swampy/soft/wet soil conditions, the LSG works great!


Each LSG Series® grid consists of a series of connected cells and expands to 9’ x 24’ (215 sf).

Alternatively, cut the grid in half and end up with two pieces that are 9' x 12'. These can be placed side-by-side to create a 12' W x 18'L parking pad.


A non-woven geotextile fabric is placed below the grid to prevent the stones in the cells from migrating down into the earth.

Rebar J Hooks (18" H) are installed every 4' - 5' in every direction to keep the grid pinned down.

The cells confine gravel to create a super strong foundation. Since infill materials are trapped in the cells they cannot shift, move, and eventually travel away.

4" cells support vehicles up to 40,000 lbs.

6" cells support vehicles up to 80,000 lbs.


Once cells are filled, gravel should be compacted in the cells. Then, overfill cell with 1" – 2” of a loose gravel “wearing course”. For a completely permeable parking pad, use ¾” clean angular stone.


INTERESTED IN GRASSY PAVING?

Easy! Installation is the same except use Triax geogrid as the underlayment instead of a non-woven geotextile and fill cells with a 50/50 mix of clean angular stone and topsoil instead of stone only. Add sod or grass/seed to the top.



Click here to read and learn more.


These products are available through Cell-Tek Geosynthetics.

Please give us a ring 888-851-0051 or email info@celltekdirect.com.

We look forward to hearing from you! www.celltekdirect.com

6 views

© 2020 Cell-Tek Geosynthetics, LLC. 

809 Barkwood Court | Suite M | Linthicum, Maryland 21090 

info@celltekdirect.com | 410-721-4844

  • Grey Facebook Icon
  • Grey Twitter Icon
  • Grey YouTube Icon
  • Grey Pinterest Icon
  • Grey Instagram Icon